Structural Masonry Repairs in Denver, CO
Not every masonry problem is cosmetic. When brick walls lean, lintels fail, foundations crack in concerning patterns, or sections of masonry begin to separate from the main structure, the repair goes beyond repointing and matching — it requires structural knowledge, proper sequencing, and the right materials for the job.
Structural Masonry Repair Services
Lintel Failure and Replacement
Lintels carry the masonry load above door and window openings. When lintels corrode, crack, or deflect, the masonry above them cracks and displaces. Signs of lintel failure include diagonal cracking from opening corners, displacement of the masonry arch above an opening, and bowing visible at the bottom of the opening.
Replacement requires the masonry above the opening to be temporarily supported, the lintel replaced, and the masonry resettled and repointed.
Wall Stabilization and Tie-Back Installation
When the outer masonry wythe separates from the structural backup — wythe delamination — corrugated stainless steel wall ties installed through the outer wythe restabilize the wall and prevent progressive failure.
Partial Wall Rebuilding
Sections of masonry beyond repair are demolished to a stable break point and rebuilt using matched materials, tied into the surrounding sound masonry.
Arch Repair and Reconstruction
When arch mortar joints fail, the keystone can displace downward, radiating cracks outward. Arch repair may require repointing only, or resetting displaced voussoir bricks — a technically precise operation.
Parapet Wall Stabilization and Rebuilding
Failed parapet walls can collapse onto sidewalks or adjacent property. We take parapet assessments and repairs seriously.
The Structural Repair Sequence
Assess and document the full scope before touching anything
Identify and address the cause — ongoing movement must be evaluated and stopped before masonry repair
Stabilize with temporary shoring or bracing where needed
Execute the repair once the cause is addressed and the structure is stabilized
Monitor — new cracking in recently repaired masonry indicates ongoing movement
When to Involve a Structural Engineer
Some masonry conditions require structural engineering evaluation before we can properly define the repair scope. We'll tell you when that's the case — and we'll work cooperatively with your structural engineer on the repair execution.
